When a camera with high resolution and speed is essential to your application, turn to Sony's latest addition to its progressive scan line up, the XC-HR70, for the solution. The new XC-HR70 is a compact, lightweight, black and white video camera incorporating the latest 1/3 Type Interline Transfer (IT) Progressive Scan CCD with HAD technology. The XC-HR70 features a remarkable XGA resolution of 1034 (H) x 779 (V) pixels and incorporates a C-mount type lens mount. The XC-HR70 can capture high-resolution images at 29 f/s and is ideal for demanding applications such as semiconductor production and high speed assembly line inspection.
Highlights:
* 1/3 Type IT Progressive Scan CCD * High frame rate - 29 full frames per second/58 binned frames per second * High rate scanning to increase vertical scanning frequency compared to the XC-55 - up to 120 partial frames per second * Partial Scan controlled by VD pulse length * Square Pixels * Minimum Illumination of 1 lux @ F1.8 * Flexible Trigger Shutter Interface - Exposure set with switches or pulse width (1/4 to 1/100,000 sec) * Horizontal Resolution - 800 TV lines * Small, lightweight one-piece body - 29 (W) x 29 (H) x 30 (D)/50g * All controls are external for easy configuration * Rugged and Robust -10G vibration tolerance/70G shock resistant * C-Mount / No IR cutoff filter
The SONY XC-HR70 Camera Features:
* 1/3 inch PS CCD built-in The sony XC-HR70 adopts a renewed CCD that can be still obtainable after March 2003. Square pixels and progressive scan format support the best use for high-speed image processing applications. Moreover the XC-HR70 realizes XGA image output (effective; 1024(V) x 768(H)) at a speed of approx. 30 frames per second. * Smallest size as progressive scan, double-speed drive camera Adopting the same body as the sony XC-HR50, the sony XC-HR70 is the smallest size in this industrial world as a progressive scan and double-speed driving video camera.Its dimensions are 29(V) x 29(W) x 30(H) mm. * High rate function The sony XC-HR70 has High-rate function just same as the sony XC-HR50 has. By controlling the vertical transmission pulse width of CCD, High-rate scanning is realized; effective video output lines are scanned at normal speed, ineffective video output lines are scanned at high speed.The start of one frame section and the end of blanking period, both of which are essential to set for High-rate function, can be prescribed by one VD signal.Vertical imaging area is narrowed down to the middle range, the number of effective video output lines varies according to frame rates. The frame rate can be freely set using pulse-cycle input from external.Maximum approx.100 fps video output is possible and in this case, the number of effective video output lines is approx.100 lines. * Special mode by external signal input The sony XC-HR70 inherits the following three modes that are incorporated in current models. -Restart/Reset -External trigger: Mode 1 (Non-reset mode) -External trigger: Mode 2 (Reset mode) * Ideal structure and price for Factory Automation use The sony XC-HR70 follows the cross-sectional shape of conventional Factory Automation cameras such as the sony XC-55 series and ES series, which enables easy installation and replacement into FA machines.All of basic settings are controllable by switches etc. on the rear panel. Since the connector conforms to the new EIAJ 12-pin assignment, the sony XC-HR70 can accept trigger pulse and WEN signal by new pin arrangement.As for the lens, the sony XC-HR70 supports generic C-mount lenses. (Recommended lens is VCL-12YM.)The reasonable and competitive price is one of strong points as well.
* Lead-free support Friendly to environment, the sony XC-HR70 establishes lead-free constitution along level 4 (use of lead-free parts and all lead-free soldering).
Sony XC-HR70 Specifications:
Camera Specifications
| Detail: |
Image Device |
1/3 type IT Progressive Scan CCD |
Image Device Value |
Monochrome |
Cell Size |
4.65 ¦Ìm x 4.65 ¦Ìm |
Effective Pixels |
1024 x 768 |
Effective Lines |
1,024 x 768 - XGA |
Camera Interface |
Analog |
Lens Mount |
C-Mount |
Flange Back |
17.526 mm |
Vertical Frequency |
23.23 kHz ¡À1 % |
Resolution |
1,024 x 768 (XGA) |
Sync System |
Int/Ext |
External Sync Signal |
HD/VD |
Jitter |
Less than 20 ns |
Scanning System |
Progressive Scan |
Gain |
Fix/Manual |
Gamma |
OFF fixed |
Normal Shutter |
Normal shutter Restart/Reset External trigger shutter (Mode 1/MODE 2) |
External Trigger Shutter / Speed |
1/4 to 1/100000s |
External Trigger |
Polarity: + Width: 2 ¦Ìs to 250ms Input impedance: 10 k¦¸ or more (H: +2 to +5.0V L: 0 to 0.6V) Polarity: + Width: 2 ¦Ìs to 250ms |
High Rate Scanning |
R/R Mode Binning Off: Max 120 frames/s R/R Mode Binning On: Max 180 frames/s External trigger shutter mode Binning Off : Max 120 frames/s External trigger shutter mode Binning On: Max 180 frames/s |
Output Signal Frequency |
29.2 Hz (normal mode) 58.4 Hz (binning mode) |
Shutter Speed |
OFF to 1/20000s switchable at rear panel |
Video Output Specifications
| Detail: |
Horizontal Resolution |
800 TV lines |
Minimum Illumination |
1.0 lux (F1.8 Manual gain Max) |
Output Connector |
12 pin (New EIAJ) |
S/N Ratio |
56 dB |
Sensitivity |
400 lux F5.6 (Fix Gain 0 dB) |
Video Output |
1.0 Vp-p Sync negative 75 Unbalanced |
General Specifications
| Detail: |
Dimensions (W x H x D) |
1 3/16 x 1 3/16 x 1 3/16 inches (29 x 29 x 30 mm) |
Weight |
50 g (2 oz) |
Power Requirements |
DC 12 V (+10.5 to 15 V) |
Power Consumption |
2.0 W |
Operating Temperature |
-5 to 40¡ãC (23 to 113 ¡ãF) |
Storage Temperature |
-30 to 60 ¡ãC (-22 to 140 ¡ãF) |
Operating Humidity |
20 to 80 % (no condensation) |
Storage Humidity |
20 to 95 % (no condensation) |
Vibration Resistance |
10G (20 Hz to 200 Hz) |
Shock Resistance |
70 G |
Regulatory Compliance |
UL 6500 FCC Class A Digital Device CE (EN61326/97+A1/98) AS4251.1+A4252.1 |
|